新聞
聯系我們
來源：http://n3462.cn/ 日期：2024-01-29
作為火災自動報警系統的控制中心,，火災報警控制器具有火災報警功能、火災報警控制功能,、故障報警功能,、屏蔽功能、監管功能,、自檢功能,、信息顯示與查詢功能及電源功能等。
As the control center of the automatic fire alarm system, the fire alarm controller has functions such as fire alarm, fire alarm control, fault alarm, shielding, supervision, self inspection, information display and query, and power supply.
（1）控制器能直接或間接地接收來自火災探測器及其他火災報警觸發器件的火災報警信號,，發出火災報警聲,、光信號，指示火災發生部位,，記錄火災報警時間，并予以保持,，直到手動復位,。控制器具有專用火警總指示燈,，控制器處于火災報警狀態時,，火警示燈點亮?；馂?zāi)報警信號能手動消防,，當再次有火災報警信號輸入時，能再次啟動,。
(1) The controller can directly or indirectly receive fire alarm signals from fire detectors and other fire alarm triggering devices, emit fire alarm sound and light signals, indicate the location of the fire, record the fire alarm time, and maintain it until manually reset. The controller has a dedicated fire alarm main indicator light, which lights up when the controller is in a fire alarm state. The fire alarm signal can be manually used for firefighting, and it can be restarted when there is another fire alarm signal input.
（2）控制器可設置控制輸出,，用于火災報警傳輸設備和消防聯動設備等設備的控制，每一控制輸出有對應的手動直接控制按鈕,。
(2) The controller can set control outputs for the control of fire alarm transmission equipment and fire linkage equipment, and each control output has a corresponding manual direct control button.
（3）故障報警功能：控制器設專用故障報警總指示燈,，無論控制器處于何種狀態,，只要有故障信號存在，該故障總指示燈點亮,。當控制器內部,、控制器與其連接的部件間發生故障時，控制器能在100S內發出與火災報警信號有明顯區別的故障聲,、光信號,，故障聲信號能手動，如再有故障信號輸入時,，能再次啟動,，故障光信號能保持故障排除。
(3) Fault alarm function: The controller is equipped with a dedicated fault alarm main indicator light. Regardless of the state of the controller, as long as there is a fault signal, the fault main indicator light will light up. When there is a fault inside the controller or between the controller and its connected components, the controller can emit a fault sound and light signal that is significantly different from the fire alarm signal within 100 seconds. The fault sound signal can be manually eliminated. If there is another fault signal input, it can be restarted and the fault light signal can be maintained until the fault is eliminated.
（4）控制器設專用屏蔽總指示燈,，無論控制器處于何種狀態,，只要有屏蔽存在，該屏蔽總指示信號燈點亮,。
(4) The controller is equipped with a dedicated shielding main indicator light. Regardless of the state of the controller, as long as there is shielding present, the shielding main indicator light will light up.
（5）監管功能（動作）：控制器設專用監管報警狀態總指示燈,，無論控制器處于何種，只要有監管信號輸入,，該監管報警狀態總指示燈點亮,。
(5) Regulatory function (action): The controller is equipped with a dedicated regulatory alarm status indicator light. Regardless of the controller's status, as long as there is a regulatory signal input, the regulatory alarm status indicator light will light up.
當有監管信息輸入時，控制器能在100S內發出與火災報警信號有明顯區別的監管報警聲,、光信號,；聲信號僅能手動，漢有冷的的監管信號輸入時能再次啟動,；光信號能保持手支復位,。如果監管信號仍存在，復位后監管報警狀態能保持或在20S內重新建立,?？刂破髂茱@示所有監管信號，當天能同時顯示時可手動查詢,。
When there is regulatory information input, the controller can emit regulatory alarm sound and light signals that are significantly different from fire alarm signals within 100 seconds; The sound signal can only be manually eliminated, and Han Youleng's supervision signal can be restarted when input; The optical signal can be maintained until the hand is reset. If the regulatory signal still exists, the regulatory alarm status can be maintained or re established within 20 seconds after resetting. The controller can display all regulatory signals and can manually query them when they can be displayed simultaneously on the same day.
（6）自檢功能：控制器能檢查本機的火災報警功能稱為自檢,。控制器在執行自檢功能期間,，受其控制的外接設備和輸出接點均不動作,。控制器自檢超過1分種或其不能自動停止時,，控制器的自檢功能不影響非自檢部位,、探測區和控制器本身的火災報警功能。
(6) Self check function: The controller's ability to check the fire alarm function of the machine is called self check. During the self check function of the controller, the external devices and output contacts controlled by it do not operate. When the self-test of the controller exceeds 1 minute or it cannot automatically stop, the self-test function of the controller does not affect the fire alarm function of non self-test parts, detection areas, and the controller itself.
（7）信息顯示與查詢功能：控制器信息顯示按火災報警,、監管報警及其它狀態順序由高低排列信息顯示等級,，高等級的狀態信息優先顯示,，低等級狀態信息顯示不應影響高等級信息顯示，顯示的信息與對應的狀態一致且易于辨識,。當控制器處于某一高等級狀態顯示時,，能通過手動操作查詢其它低等級狀態信息，和狀態信息不交替顯示,。
(7) Information display and query function: The controller displays information in descending order of fire alarm, regulatory alarm, and other status. High level status information is displayed first, while low level status information should not affect the display of high level information. The displayed information should be consistent with the corresponding status and easy to identify. When the controller is in a certain high-level status display, it can manually query other low-level status information without alternating with the status information.
（8）電源功能：主機控制器具有主電源和備用電源轉換裝置,，當主電源斷電時，能自動轉換到備用電源,；主電源恢復時,，能自動轉換到主電源?？刂破饔兄?、備電源工作狀態指示，主備電源轉換不不使控制器產生誤動作,。
(8) Power function: The host controller has a main power and backup power conversion device, which can automatically switch to the backup power when the main power is cut off; When the main power supply is restored, it can automatically switch to the main power supply. The controller has the indication of the working status of the main and backup power supplies, and the conversion of the main and backup power supplies does not cause the controller to malfunction.
本文由川消友情奉獻.更多有關的知識請點擊:http://n3462.cn我們將用真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.
This article is dedicated by Chuanxiao Youqing. For more related knowledge, please click: http://n3462.cn We will provide you with comprehensive service with a sincere attitude. We will gradually contribute more relevant knowledge to everyone. Stay tuned
